01Laser Welded
12"–16" Laser Welded Diamond Handheld Saw Blade for Concrete
- Ø 300–400 mm
- Cut-off saws
- Dry / Wet
Factory-Direct · Nanjing, China
Diamond Tool Manufacturer for Concrete, Stone & Ceramic Cutting, Drilling and Grinding
Johnson Tools engineers and manufactures laser-welded diamond saw blades, diamond core drill bits, grinding cup wheels and polishing pads for contractors, rental fleets and distributors worldwide. Our founders have spent more than 20 years on real jobsites and in diamond segment R&D — so every bond formula is tuned to the aggregate, rebar density and machine power your customers actually face.
Since founding
20+
Years of diamond tool industry experienceExport
100%
Export-oriented production for global buyersRange
9
Specialised product lines, from wall saw to polishingCoring
600mm
Max. core drill bit diameter (from 18 mm) Product Category
Professional Diamond Tools Engineered for Every Cutting Job
From 115 mm tuck point blades to 24-inch wall saw blades and 600 mm core bits — one factory, one QC system, consistent performance across your entire catalogue.
- Diamond Blade
- Diamond Core Drill Bit
- Diamond Grinding Wheel
- Diamond Polishing Pad
- Power Tool Accessories
- Concrete Blade
- Floor Saw Blade
- Prestressed Saw Blade
- Tuck Point Saw Blade
02Wall Saw
24 Inch Laser Welded Diamond Wall Saw Blade for Reinforced Concrete
- Ø 600 mm
- Heavy rebar
- Wet cutting
03Early Entry
6"–14" Early Entry Diamond Saw Blades for Green Concrete
- Ø 150–350 mm
- Soff-cut style
- Abrasive bond
04Tuck Point
120mm Laser Welded Tuck Point Blade for Hard Concrete Flooring
- Ø 120 mm
- Angle grinders
- Joint chasing
05Hot Pressed
Hot Pressed Sintered Dekton Diamond Tile Saw Blade
- Porcelain
- Sintered stone
- Chip-free edge
06Core Drill
18–600mm Diamond Core Drill Bits for Reinforced Concrete
- Ø 18–600 mm
- Laser welded
- Wet coring
07Bi-Metal
9" 14TPI Bi-Metal Sabre Saw Blades for Metal & Cast Iron (5 Pack)
- 14 TPI
- Heavy duty
- Retail pack
08Multi-Tool
35mm Quick Release HCS Oscillating Multi-Tool Blades for Wood & Plastic
- 35 mm
- HCS steel
- Quick release
Why Johnson Tools
Engineering Experience You Can Verify Before You Order
Built by diamond tool professionals who have worked alongside contractors and distributors for over two decades.
About Johnson Tools
A Manufacturer Founded on Jobsite Knowledge
Johnson Tools is a professional manufacturer and global supplier of diamond tools for concrete, reinforced concrete, asphalt, stone and ceramic applications. Our founders bring more than 20 years in the diamond tools industry, working directly with real cutting applications, jobsite challenges and buyer requirements across different markets.
That experience shapes how we specify diamond grit, concentration and bond for each region's aggregates — and why distributors trust us with their private-label programmes.
Download Company Catalog 01
Global Expertise
20+ years in diamond tools and 100% export production — quality proven by contractors and distributors in markets worldwide.
02
Quality Assured
SGS / TÜV / CE certified with full-process QC. 1-year warranty plus 3-month free return & replacement for quality issues.
03
Custom & One-Stop
OEM/ODM on every product, NDA design protection and a dedicated team following your order from sample to shipment.
04
Reliable Delivery
Real-time production updates, multiple trade terms, long-term logistics partners, complete customs documents and trackable delivery.
Engineer's Selection Guide
How to Choose the Right Diamond Tool for Each Material
The single biggest cause of slow cutting or premature segment wear is a bond that doesn't match the material. Use this field-tested matrix before you place your next order.
Laser Welded
Maximum Segment Retention
Segments are fused to the steel core by laser, withstanding heat from dry cutting and the impact of rebar. Our choice for handheld, wall saw and core drill applications.
Hot Pressed Sintered
Precision on Brittle Materials
Continuous or fine-turbo rims pressed under heat give the clean, chip-free edge required on porcelain, Dekton and sintered stone slabs.
Bond Engineering
Hard Material = Soft Bond
Hard aggregates need a softer bond to expose fresh diamonds; abrasive materials such as asphalt or green concrete need a harder bond to resist wear.
| Material / Job | Recommended Tool | Bond | Field Tip |
|---|---|---|---|
| Cured reinforced concrete | Laser-welded concrete blade or wall saw blade | Medium | Cut wet when rebar density is high to control heat and extend segment life. |
| Green / early-entry concrete | Early entry blade with skid plate | Hard | Cut as soon as the slab can bear the saw to prevent random shrinkage cracks. |
| Asphalt & abrasive surfaces | Floor saw blade with undercut protection | Hard | Undercut segments protect the steel core from abrasive wash. |
| Prestressed / precast slabs | Prestressed saw blade | Medium–Hard | Choose higher segments for strand-reinforced hollow-core cutting. |
| Mortar joints & repointing | Tuck point saw blade | Medium | Match segment width to joint width to avoid damaging brick faces. |
| Granite & hard natural stone | Turbo or segmented diamond blade | Soft | If the blade glazes, dress it on an abrasive block to re-expose diamonds. |
| Porcelain, Dekton, sintered stone | Hot-pressed continuous rim blade | Soft | Reduce feed rate on entry and exit to prevent edge chipping. |
| Concrete coring (18–600 mm) | Diamond core drill bit | Medium | Keep steady water flow and avoid excessive pressure to prevent bit binding. |
| Surface prep & finishing | Grinding cup wheel → polishing pads | Varies | Progress through grits without skipping steps for a uniform finish. |
Not sure which specification fits your market? Send us the material, machine power and wet/dry requirement — our engineers will recommend a bond and segment design.
Applications & Case Studies
Proven on Real Jobsites Across Four Continents
How distributors, fabricators and infrastructure contractors use Johnson Tools to cut faster and reduce cost per metre.
Russia · Distribution
Exporting 115mm Laser-Welded Diamond Blades to Russian Distribution Partners
Custom 115mm laser-welded blades developed for Russian distributors, with bond and packaging tailored to local aggregates and retail channels.
Read the case
Stone Fabrication
How a Mid-Size Stone Shop Boosted Cutting Efficiency by 35%
Switching to Johnson Tools professional turbo diamond saw blades delivered faster cuts and cleaner edges on granite and engineered stone.
Read the case
Europe · Surface Prep
Concrete Grinding Wheels for European Surface Preparation
Factory-direct 5-inch diamond grinding cup wheels supporting professional floor preparation crews across Europe.
Read the case
Philippines · Infrastructure
Heavy-Duty Diamond Saw Blades for Philippine Infrastructure
Concrete saw blades engineered for high-volume road and building projects, supporting fast-growing infrastructure development.
Read the case Certificates & Compliance
Certified Quality, Documented for International Buyers
Independent test reports and certifications for import compliance. Click any certificate to view it in full resolution.
1 / 11
Technical Insights
Field Guides From Our Diamond Tool Engineers
Practical troubleshooting and specification advice written for contractors, buyers and product managers.
How to Stop Premature Diamond Blade Wear: Expert Guide
Field troubleshooting steps and factory-engineered solutions for blades that wear out faster than expected.
Read article
Diamond Blade Wear & Glazing: A Field Troubleshooting Guide
Why blades glaze, how to read segment wear patterns and when to change bond rather than blade size.
Read article
Laser-Welded 300–400mm Hand Held Saw Blades for Dry Concrete
What makes laser-welded segments safer and longer-lasting for dry cutting with petrol cut-off saws.
Read article Buyer FAQ
Answers for Importers, Distributors & Contractors
Everything procurement teams ask us before the first sample order. Need more detail? Our export team replies within one business day.
Contact Our TeamIs Johnson Tools a manufacturer or a trading company?
We are a manufacturer. Our factory is in Tuqiao Industrial Park, Jiangning District, Nanjing, and our export sales department is in Suzhou Industrial Park, Jiangsu, China. The company was founded by professionals with more than 20 years in the diamond tools industry, and our production is 100% export-oriented.
Do you offer OEM and ODM diamond tools?
Yes. OEM and ODM are available for all product lines — diameter, segment height and shape, bond formula, arbor size, laser marking and retail packaging. We sign NDAs to protect your designs.
Which certifications do your products have?
Our products are SGS, TÜV and CE certified, and every batch passes a full-process QC system covering raw materials, segment welding strength, dynamic balance and finished-product inspection.
What warranty do you provide?
A 1-year warranty plus a 3-month free return and replacement policy for any quality issue.
How do I choose the right bond for a diamond saw blade?
Hard, dense materials such as granite or cured concrete with hard aggregate need a softer bond so worn diamonds release and fresh ones are exposed. Abrasive materials such as asphalt, green concrete and block need a harder bond to resist fast segment wear. See the selection matrix above.
What information helps you recommend the right tool?
The material being cut or drilled, aggregate hardness and rebar content, machine type and power, wet or dry use, required diameter and arbor, and expected monthly volume.
How do you handle shipping and export documents?
We support multiple trade terms, work with long-term international logistics partners, prepare complete customs documents and provide real-time production updates and trackable delivery.
Build a Diamond Tool Range Your Customers Trust
Get our full catalogue with specifications for blades, core bits, grinding wheels and polishing pads — or speak directly with an application engineer.